___

• Motorcu, A.R., Ç1050, Ç4140 ve Ç52100
• Çeliklerinin Farklı Takımlarla İşlenebilirliği
• ve Modeller Geliştirilmesi, Doktora Tezi, Gazi
• Üniversitesi, Fen Bilimleri Enstitüsü, 2006.
• Çakır, C., Modern Talaşlı İmalatın Esasları,
• Uludağ Üniversitesi Güçlendirme Vakfı
• Yayınları, 140, Bursa, 1999.
• Huang, CZ., Wang, J. ve Ai, X., “Development
• of New Ceramic Cutting Tools with Alumina
• Coated Carbide Powders”, International
• Journal of Machine Tools and Manufacture,
• Cilt 40, No 6, 823-832, 2000.
• Kumar, A.S., Durai, A.R. ve Sornakumar, T,
• “Machinability of Hardened Steel Using Alumina
• Based Ceramic Cutting Tools”, International
• Journal of Refractory Metals and Hard
• Materials, Cilt 21, No 3-4, 109-117, 2003.
• Chonghai, X, Xing, A. ve Chuanzhen, H.,
• “Fabrication and Performance of An Advanced
• Ceramic Tool Material”, Wear, Cilt 349, 503-
• , 2001.
• Altintas, Y., “Manufacturing Automation- Metal
• Cutting Mechanics, Machine Tool Vibrations and
• CNC Design”, Cambridge University Press,
• Cambridge, 1-3, 2000.
• Choudhury, I.A. ve Baradie, M.A., “Surface
• Roughness Prediction in The Turning of High-
• Strength Steel by Factorial Design of
• Experiments”, Journals of Processing
• Technology, Cilt 67, 55-61, 1997.
• Lee, B.Y., Tarng, Y.S. ve Lii, H.R., “An
• Investigation of Modeling of The Machining
• Database in Turning Operations”, Journal of
• Materials Processing Technology, Cilt 105, 1-6,
• -
• Lamond, B.F. ve Sodhi, M.S., “Using Tool Life
• Models to Minimize Processing Time on A
• Flexible Machine”, IIE Transactions, Cilt 29,
• -621, 1997.
• Lee, J. H. ve Lee, S. J., “One-Step-Ahead
• Prediction of Flank Wear Using Cutting Force”,
• International Journal of Machine Tools and
• Manufacture, Cilt39, 1747-1760, 1999.
• Sutter, G., “Chip Geometries During High-Speed
• Machining for Orthogonal Cutting Conditions”,
• International Journal of Machine Tools and
• Manufacture, Cilt 45, 719-726, 2005.
• Becze, C.E. ve Elbestawi, M.A., “A Chip
• Formation Based Analytic Force Model for
• Oblique Cutting”, International Journal of
• Machine Tools and Manufacture, Cilt 42, 529-
• , 2002.
• Fang, N., “Tool-Chip Friction in Machining with
• A Large Negative Rake Angle Tool”, Wear, Cilt
• , 890–897, 2005.
• Lazoglu, İ. ve Altintas, Y., “Prediction of Tool
• and Chip Temperature in Continuous and
• Interrupted Machining”, International Journal
• of Machine Tools and Manufacture, 42, 1011-
• , 2002.
• TS 10329, Torna Kalemleri-Ömür Deneyi,
• Türk Standartları Enstitüsü, Ankara, 1992.
• Kennametal Hertel, Lathe Tools-Master
• Catalogue 2001, Kennametal Hertel AG, Fürth,
• -
• Ranjit, K.R., A Primer On The Taguchi
• Method, Competitive Manufacturing Series, Van
• Nostrand Reinhold, New York, A.B.D., 1990.
• Ruppi, S., Högrelius, B. ve Huhtiranta, M.,
• “Wear characteristics of TiC, Ti(C,N), TiN and
• Al2O3 Coatings in The Turning of Conventional
• and Ca-Treated Steels”, International Journal
• of Refractory Materials and Hard Materials,
• Cilt 16, 353-368, 1998.
• Jang, D.Y. ve Hsiao, Y.T., “Use of Ceramic
• Tools in Hard Turning of Hardened AISI M2
• Steel”, Tribology Transactions, Cilt 43, No 4,
• -646, 2000.
• Wayne, S. F. ve Buljan S.T., “Role of Thermal
• Shock on Tool Life Selected Ceramic Cutting
• Tool Materials”, Journal of American Ceramic
• Society, Cilt 72, 754-760, 1989.
• D’Errico, G.E. ve Calzavarini, R., “Advanced
• Ceramic Tools: An Experimental Assessment in
• Turning Tests”, Journal of Materials
• Processing Technology, Cilt 54, 34-39, 1995.
• Wada, T., Sakurai, M. ve Ogura, A., “Tool Wear
• in Cutting of Sintered Iron Materials”, Journal of
• the Japan Society of Powder and Powder
• Metallurgy, Cilt 48, No 5, 386-391, 2001.
• Chakraborty, A., Ray, K.K. ve Bhaduri, S.B.,
• “Comparative Wear of Behavior of Ceramic and
• Carbide Tools During High Speed Machining of
• Steel”, Materials and Manufacturing
• Processes, Cilt 15, No 2, 269-300, 2000.
• Bhattacharyya, S. K. ve Jawaid, A., “Tool Life
• and Wear Mechanism of Sialon Ceramic Tools
• when Machining Nickel Based Materials”, 5th
• International Conference on Production
• Engineering, Tokyo, Japonya, 203-208, 1989.