___

• Höganäs AB,. “Material and Powder Properties
• Volume 1”, Höganäs Handbook for Sintered
• Components, Sweden. 2004a.
• Benner, A., Beis, P., “Wear Aspects During Gren
• Machining of Warm Compacted PM Steels”,
• Mat.-wiss. U. Werkstofftech, 35, no.10/11, 663-
• , 2004.
• Šalak, A., Selecká, M., Danninger, H.,
• “Machinability of Powder Metallurgy Steels”, Cambridge International Science Publishing,
• , Cambridge UK, 2005.
• Yılmaz, N., Demir-Esaslı TM malzemelerin
• Talaşlı İşlenebilirliği, Doktora Tezi, S.D.U. Fen
• Bil. Enstitüsü, Isparta, 2006.
• Agapiou, J.S., DeVries, M.F., Machinability of
• Powder Metallurgy Materials, The International
• Journal of Powder Metallurgy, vol. 24, no 1,
• -57, American Powder Metallurgy Institute,
• -
• Armarego, E.J.A., Shi, G., Verezub, S.,
• Modelling the Basic Cutting Action and
• Machining Performance of Sintered Metallic
• Materials, Machining Science and Technology, 5
• (3), 353-373, Marcel Dekker Inc., 2001.
• Smith, G.T., Surface Integrity aspect of
• Machinability Testing of Fe-C-Cu Powder
• Metallurgy Components, Powder Metallurgy,
• Vol. 33, No. 2, 157-164, 1990a.
• Smith, G.T., The Machining of P/M Components
• in a Flexible manufacturing Environment.
• Proceedings of World Conference on Powder
• Metallurgy, Vol.1, Wembley Conference
• Centre, London, 2-6 July, 1990b.
• Mazilu, D., Craciunoiu, N., Cialacu, F.G., “On
• the Cutting Forces and Tool Wear for some
• Powder Metallurgy Materials”, Proceedings of
• the SECTAM-XX., April 16-18, Callaway
• Gardens, Pine Mountain, GA, 2000.
• Romero, A., Vivancos, J., Sierra, C., Prado, J.M.,
• “Rapid Characterisation of Machinability on PM
• Steel Parts”, PM World Congress Proceedings,
• Post Sintering, EPMA, October 18-22, Granada-
• Spain, 1998.
• Roy, L.G., de Rege, A.F., Pease, L.F., 1988, “
• Relationship Between Machinability and Strength
• in a Prealloyed Manganese Sulfide Sintered
• Material”, Proceedings of Int. PM Conference,
• Vol. 21, Ch. 7, Steps to Improve Machinability,
• APMI.
• Beis, P., Jager, H-J., Kutsch, U., “Heat Balance
• During Drilling of a Sintered Stainless Steel”,
• PM World Congress Proc., Post Sintering,
• EPMA, October 18-22, Granada-Spain, 1998.
• Causton, R.J., Schade, C., Machinability:A
• Material Property or Process Response, P/M2
• TEC 2003 World Congress, Las Vegas, 2003.
• Kutsch, U., Beis, P., Jager, J-J., “Effect of
• Density on Mechanical Properties, Thermal
• Conductivity and Machinability of Sintered
• Stainless Steels”, European Conference on
• Advances in Structural PM Component
• Production-Finishing, Munich-Germany,
• October 15-17, EPMA, 1997.
• Fulmer, J.J., Blanton, M.J., “The Effect of
• Microstructure on the Machinability of an MPIF
• FC-0208 Copper Steel” , PM
• Conference&Exhibition, 4, APMI, 1992.
• Nigarura, S., L’esperance, G., Roy, L,G., de
• Rege, A., Pease, L, F., “The Influence of Powder
• Processing on The Nature of Inclusions and Its
• Relation to The Machinability of MnS Prealloyed
• P/M Parts”, Proceedings of The PM Conference
• & Exhibition, v.4, Secondary Operations,
• Quality and Standarts, APMI, 1992.
• Gülsoy, H. Ö., Uçar, M., Özcan, E., “Fe-Cu-C
• Kompaktlarına Katılan İlave C Miktarının
• İşlenebilirlik Özelliklerine Etkisi”, Uluslarası
• katılımlı 2.Ulusal Toz Met. Konf. Bildiriler
• Kitabı, s. 475-481, 15-17 Eylül 1999, ODTÜ,
• ANKARA, 1999.
• Hultman, L., Thoors, H., Sten, B., Influence of
• machining Parameters on the Machinability of
• Sintered Steels, P/M2 TEC’96 World Congress,
• Washington, 1996
• Gagné, M., Danaher, A., Influence of Drilling
• Parameters on the Machinability of P/M
• Materials, P/M2 TEC 1998 World Congress,
• Las Vegas, 1998.
• Engström, U., “Machinability of Sintered Steels”,
• Pov. Met., 26 (3), 137-143, 1983.
• Chopra, K.S., “Manganese Sulfide in Machining
• Grade Ferrous P/M Alloys”, Proceedings of Int.
• PM Conference, Vol. 21, Ch. 7, Steps to
• Improve Machinability, APMI, 1988.
• Poirer, J.P., Gagne, M., “A New Approach to
• Improve Machinability of High Strength PM
• Parts”, Metal Powder Report, Vol. 45, No.3,
• -186, 1990.
• Ambs, H.D., “Machinability Studies on Sintered
• Stainless Steels”, Proceedings of the 1991
• Conference &Exhibition Vol.3, Advances in
• PM, APMI, 1991.
• Madan, D.S., “Effect of Manganese Sulfide
• (MnS) on Properties of High Performance P/M
• Alloys and Applications”, Proceedings of The
• PM Conference & Exhibition, v.4, Secondary
• Operations, Quality and Standarts, APMI, 1992.
• Chen, Y.T., Baudisch, R., Ceci, L. and Kiefer,
• R., “Free-Machining P/M Alloy Optimization
• using Statistical Analytical Techniques-The
• Effect of MnS Content and Particle Size”,
• Proceedings of The PM Conference &
• Exhibition, v.4, Secondary Operations, Quality
• and Standarts, APMI, 1992.
• Madan, D.S., “Effect of Manganese Sulfide
• (MnS) on Properties of High Performance P/M
• Alloys and Applications”, Proceedings of The
• PM Conference & Exhibition, v.4, Secondary
• Operations, Quality and Standarts, APMI, 1992.
• Causton, R:J., Machinability of P/M Steels,
• Proceedings of Int. Conf. On P/M and
• Particulate Materials, Seattle, Washington, US,
• -
• Romero, A., Vivancos, J., Sierra, C., Prado, J.M.,
• “Rapid Characterisation of Machinability on PM
• Steel Parts”, PM World Congress Proceedings,
• Post Sintering, EPMA, October 18-22, Granada-
• Spain, 1998
• Blais, C., L’Espérance, G., Bourgeois.,
• Characterisation of Machinability of Sintered
• Steels During Drilling Operations, Pow. Metal.,
• Vol.44, No1, 67-75, 2001 .
• Causton, R.J., Role of Additives in PM
• Machining, P/M2 TEC 2002 World Congress
• on PM and Particulate Materials, June 16-21,
• Orlando, Florida, 2002.
• Srivastava, A.K., “An Experimental Investigation
• on the Machinability of Powder Metal Steels”,
• Int. J. Precision Technology, Vol. 1, No. 1, 11-
• , 2007.
• Johansson, R., “ Different Methods To Improve
• of High Strength Sintered Steels”, Proceedings
• of Int. PM Conference, Vol. 21, Ch. 7, Steps to
• Improve Machinability, APMI, 1988.
• Chagon, F., Gagne, M., “Machining Sinter
• Hardenable PM Materials”, PM World
• Congress Proceedings, Post Sintering, EPMA,
• October 18-22, Granada-Spain, 1998.
• Cimino, T.M., Luk, S.H., Machinability
• Evaluation of Selected High Gren Strength P/M
• Materials, P/M2 TEC World Congress on PM
• and Particulate Materials, May 14-17, Seattle,
• Washington USA, 1995.
• Causton, R:J., Machinability of P/M Steels,
• Proceedings of Int. Conf. On P/M and
• Particulate Materials, Seattle, Washington,
• USA, 1995.
• Gagne, M., Chagnon, F., Enhancing the
• Machinability of Powder Forged Components.
• PM World Congress Proceedings, Post
• Sintering, EPMA, October 18-22, Granada-
• Spain, 1998.
• Chagnon, F., Tremblay, L., St-Laurent, S.,
• Gagné, M., Improving Gren Strength to Enable
• Gren Machining, SAE, Technical Paper, 01-
• , 1999.
• Benner, A., Beis, P., Wear Aspects During Gren
• Machining of Warm Compacted PM Steels,
• Mat.-wiss. U. Werkstofftech, 35, no.10/11, 663-
• , 2004.
• Vaccari, J., “Improving Machinability of PM
• Parts”, Machine Shop Guide Web Archive,
• March, 2000.
• Berg, S., Machinability of Sintered Steels:
• Guidelines for Turning, Drilling and Tapping.
• International Conferences on Advances in
• Powder Metallurgy &Particulate Metarials,
• Proceedings, Vol. 2, MPIF/APMI, Chicago,
• USA, 1997.
• Berg, S., Thorndenberg, H., “Cutting Data
• Recommendations for Turning ofVarious PM
• Materials using Different Tool Grade and
• Geometry Selections”, PM World Congress
• Proceedings, Post Sintering, EPMA, October
• -22, Granada-Spain, 1998.
• Höganäs AB, Machining Guidelines Volume 5.
• Höganäs Handbook for Sintered Components,
• Sweden, 2004b.
• MPIF Standart 35, Materials Standarts for P/M
• Structural Parts. Metal Powder Industries
• Federation, Princeton, NJ., USA, 2000.
• ASM Metals Handbook, Powder Metal
• Technologies and Applications Volume 7. ASM
• International, 1146. USA, 1998.
• Mazilu, D., Craciunoiu, N., Cialacu, F.G., “On
• the Cutting Forces and Tool Wear for some
• Powder Metallurgy Materials”, Proceedings of
• the SECTAM-XX., April 16-18, Callaway
• Gardens, Pine Mountain, GA, 2000.
• Chawla, N., Deng, X., Microstructure and
• Mechanical Behavior of Sintered Steels.
• Materials Science & Engineering A, 390, 98-
• , 2005.
• German, R.M., Powder Metalurgy Science,
• MPIF, 278. USA, 1984.
• Brânduşan, L., Researches Regarding the
• Influence of Cu Content on Static and Dynamic
• Properties of Sintered Steels. Leonardo
• Electronic Journal of Practices and
• Technologies, ISSN 1583-1078, Issue 4,
• January-June, 30-37, 2004.
• Oxley, P.L.B., The Mechanics of Machining:
• An Analytical Approach to Assessing
• Machinability, Ellis Horwood Limited, England,
• -