___

• İpekçioğlu N., “Frezecilik”, Milli Eğitim
• Basımevi, 1984.
• Sel S., “Notlar”, HEMA Dişli Fabrikası,
• Ankara, 2000.
• Bouzakis K.D., Kombogiannis S., Antoniadis A.,
• Vidakis N.,, “Gear hobbing cutting process
• simulation and tool wear prediction models”,
• Journal of Manufacturing Science and
• Engineering, Vol. 124, 42-51, 2002.
• Sulzer G., ‘‘Leistungssteigerung bei der
• Zylinderradherstellung durch genaue Erfassung
• der Zerspankinematik,’’ Dissertation, TH
• Aachen,1974.
• Bouzakis K. D., and Antoniadis A., ‘‘Optimizing
• Tool Shift in Gear Hobbing,’’ CIRP Ann., 44,
• -
• Cooke D.A.D, Welbourn D.B., “Forces in gear
• hobbing-1”, Machinery (Lond), Vol. 111, No.
• , 475-477, 1967.
• Cooke D.A.D, Welbourn D.B., “Forces in gear
• hobbing-1”, Machinery (Lond), Vol. 112, No.
• , 258-261, 1968.
• Wakuri A.; Ueno, T.; Ainoura M., “Study of gear
• hobbing” Japan Society of Mechanical Engineers
• -- Bulletin, Vol. 9, No. 34, 409-416, 1966.
• Hannam R.G.; Andrew C., “Analysis of geometry
• of gear hobbing” Institution of Mechanical
• Engineers -- Proceedings, V 182, N 25, 559-
• , 1967-1968.
• Thamer “Investigation of the cutting force in
• hobbing”, Research report, Aachen Polytechnic,
• -
• Ziegler “Cutting forces when hobbing straightand
• helical tooth spur gears”, Research report,
• Aachen Polytechnic, 1966.
• Ohtubo T., “Simple equations for cut amount in
• hobbing”, Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the JSME, Part C Vol. 55,
• Issue 511, 818-819, 1989.
• Koenig W., Bouzakis K., “Determination of the
• time course of the cutting force components in
• gear hobbing”, ASME, (Paper) Issue 80 -
• C2/DET-75, 9, 1980.
• Bashkirov, V.N., “Experimental study of the
• dynamics of hobbing with coarse-module hobs”,
• Soviet Engineering Research, Vol. 4, Issue 12,
• -69, 1984.
• Deb Sr., Bhattacharyya A., “Forces in gear
• cutting”, Journal of the Institution of
• Engineers (India): Mechanical Engineering
• Division, Vol. 51, Issue 5 pt ME3, 102-107,
• -
• Bhattacharyya A, Deb Sr., “Mechanics of gear
• hobbing”, ASME- 69-WA/Prod-7, 6 1969.
• Ohtubo T., “Study on designing gear cutting
• fixtures”, Nippon Kikai Gakkai Ronbunshu, C
• Hen/Transactions of the JSME, Part C Vol.55,
• Issue 515, 1820-1822, 1989.
• Ali K. A., “Experimental determination of
• relatıonship of cutting force wıth cutting
• parameters”, Mechanical Engineering Research
• Bulletin (Dhaka), Vol. 7, 29-32, 1984.
• Ohtubo T., “Simple equations for predictıon of
• cutting forces in gear hobbing”, Nippon Kikai
• Gakkai Ronbunshu, C Hen/Transactions of
• the JSME Part C Vol. 55, Issue 511, 820-822,
• -
• Kaçal, A., Gülesin, M., “Azdırma Freze
• Çakılarında Kesme Kuvvetlerinin Ölçülmesi Ve
• Takım Aşınmasının İncelenmesi Üzerine Yapılan
• Çalışmaların Değerlendirilmesi”, 4rd
• International Advanced Technologies
• Symposium, Konya, 574-580, 2005.
• TS 11133, “Kesici Takımlar-modül azdırma freze
• bıçakları”, TSE, 1993.
• Shaw, M.C., “Metal cutting principles”, Oxford
• University Press, Oxford, 1-9, 1989.
• Trent, E.M., “Metal cutting”, Butterworths
• Press, London, 1-171, 1989.
• Habalı, K., “Kesici takım kaplama malzemesinin
• takım-talaş ara yüzey sıcaklığı üzerindeki
• etkisinin deneysel olarak araştırılması”, Doktora
• Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü,
• Ankara, 2003.
• Söderberg, S., “Wear mechanism and tool life of high
• speed steels related to microstructure”, Doktora Tezi,
• Uppsala Üniversitesi, Uppsala, 1982.