ALSİ7 KÖPÜKLERİN GÖZENEK MORFOLOJİSİ ÜZERİNE B4C İLAVESİNİN ETKİSİ

Bu çalışmada toz metalurjisi yöntemi ile üretilmiş AlSi7 köpüklerin gözenek morfolojisi üzerine B4C ilavesinin etkisi incelenmiştir. Bu amaçla Al içerisinde % 1 TiH2, % 7 Si ve değişik oranlarda (% 2, 4 ve 6) B4C tozları ilave edilerek karıştırılmıştır. Daha sonra karışım tozlar 400 MPa altında sıkıştırılmıştır. Elde edilen blok numuneler ekstrüzyon ve haddeleme işlemlerinden geçirilerek köpürebilir malzemeler üretilmiştir. Üretilen numuneler farklı sıcaklıklarda (690, 710, 730 ve 750 °C ) serbest halde köpürtme işlemine tabi tutulmuştur. Deneysel sonuçlara göre; düşük köpürtme sıcaklıklarında B4C takviyeli numuneler, parçacık içermeyen numunelere oranla daha düşük hacimsel genleşme sergilemiştir. Genleşme değerleri köpürtme sıcaklığındaki artışa bağlı olarak artmıştır. Numunelerin tamamına yakınında 750 °C köpürtme sıcaklığında maksimum oranda hacimsel genleşme değerleri (% 350 - % 400) elde edilmiştir. B4C miktarı ve köpürme sıcaklıktaki artış ile birlikte numunelerde küresellik faktörü ve gözenek boyutlarının arttığı, gözenek sayısının ise azaldığı tespit edilmiştir.

___

  • Baumaister, US patent (1992).
  • Yu, C.J., Eifert, H.H., Banhart, J., Baumeister, J., ‘‘Metal foaming by a powder metallurgy method: Production, properties and applications’’, Materials Research Innovations, Cilt 2, No 3, 181–188, 1998.
  • Banhart, J., ‘‘Manufacture, characterization and application of cellular metals and metal foams’’, Progress in Materials Science, Cilt 46, No 6, 559-632, 2001.
  • Baumgärtner, F., Duarte, I., Banhart, J., ‘‘Industrialization of powder compact foaming process’’, Advanced Engineering Materials, Cilt 2, No 4, 168-174, 2000.
  • Banhart, J., ‘‘Metallic foams: challenges and opportunities’’, 3rd Euroconference on foams, emulsions and applications, Delft, Netherlands, 13-20, 5-8 June 2000,
  • Banhart, J., “Manufacturing routes for metallic foams”, Journals of Materials, Cilt 52, No 12, 22-27, 2000.
  • Banhart, J., “Aluminium Foams for lighter vehicles”, International Journal of Vehicle Design, Cilt 37, No 2/3, 114-125, 2005.
  • Kevorkijan, V., Skapin, S. D., Paulin, I., Sustarsic, B., Jenko, M., Lazeta, M., ‘‘Influence of the foaming precursor’s composition and density on the foaming efficiency, microstructure development and mechanical properties of aluminium foams’’, Materials and Technology, Cilt 45, No 2, 95–103, 2011.
  • Degischer, H.P., Krıszt, B., ‘‘Handbook of Cellular Metals: Production, Processing and Applications’’, Wiley-VCH, Weinheim, 2002.
  • Türker, M., ‘‘Production of ceramics reinforced Al foams by powder metallurgy techniques’’, Materials Science Forum, Cilt 672, 39-46, 2011.
  • Sarajan, Z., Sedigh, M., ‘‘Influences of Titanium Hydride (TiH2) Content and Holding Temperature in Foamed Pure Aluminum’’, Materials and Manufacturing Processes, Cilt 24, No 5, 590–593, 2009.
  • Matijasevic-Lux, B., Banhart, J., Fiechter, S., Görke, O., Wanderka, N., ‘‘Modification of titanium hydride for improved aluminium foam manufacture’’, Acta Materialia, Cilt 54, No 7, 1887–1900, 2006.
  • Wübben, T., Stanzick, H., Banhart, J., Odenbach, S., ‘‘Stability of metallic foams studied under microgravity’’, Journal of Physics: Condensed Matter, Cilt 15, No: 1, 427–433, 2002.
  • Zeppelin, F., Hirscher, M., Stanzick, H., Banhart, J., ‘‘Desorption of hydrogen from blowing agents used for foaming metals’’, Composites Science and Technology, Cilt 63, No 16, 2293–2300, 2003.
  • Solórzano, E., Moreno, F. G., Babcsán, N., Banhart, J., ‘‘Thermographic monitoring of aluminium foaming process’’, Journal of Nondestructive Evaluation, Cilt 28, No 3, 141–148, 2009.
  • Asavavisithchai, S., Opa, A., ‘‘Effect of TiC particles on foamability and compressive properties of aluminium foams’’, Chiang Mai Journal of Science, Cilt 37, No 2, 213-221, 2010.
  • Gökmen, U., Türker, M., ‘‘Al2O3 ilavesinin alüminyum ve alumix 231 esasli metalik köpüğün köpürme özelliklerine etkisi’’, Journal of The Faculty of Engineering and Architecture of Gazi University, Cilt 27, No 3, 651-658, 2012.
  • Güden, M., Yüksel, S., ‘‘SiC-particulate aluminum composite foams produced from powder compacts: foaming and compression behavior’’, Journal of Materials Science, Cilt 41, No 13, 4075–4084, 2006.
  • Kennedy, A. R., Asavavisitchai, S., ‘‘Effect of ceramic particle additions on foam expansion and stability in compacted Al-TiH2 powder precursors’’, Advanced Engineering Materials, Cilt 6, No 6, 400-402, 2004.
  • Kennedy, A.R., Asavavisitchai, S., ‘‘Effects of TiB2 particle addition on the expansion, structure and mechanical properties of PM Al foams’’, Scripta Materialia, Cilt 50, No 1, 115–119, 2004.
  • Uzun, A., Turker, M., ‘‘The investigation of mechanical properties of B4C reinforced AlSi7 foams’’, International Journal of Material Research, Cilt 106, No 9, 970-977, 2015.
  • Duarte, I., Banhart, J., ‘‘A study of aluminium foam formation-kinetics and microstructure’’, Acta Materialia, Cilt 48, No 9, 2349-2362, 2000.
  • Esmaeelzadeh, S., Simchi, A., ‘‘Foamability and compressive properties of AlSi7–3 vol.% SiC–0.5 wt.% TiH2 powder compact’’, Materials Letters, Cilt 62, No 10-11, 1561–1564, 2008.
  • Park, S.H., Hur, B.Y., ‘‘A study on the viscosity and surface tension in molten Al and the effect of additional elements’’, 3rd International Conference on Cellular Metals and Metal Foaming Technology, Berlin, Germany, 123-128, 23-25 June 2003.
  • Murray, J.L., McAlister, A.J., “The Al-Si (Aluminum-Silicon) system”, Bulletin of Alloy Phase Diagrams, Cilt 5, No 1, 74-75, 1984.
  • Babscan, N., Leitlmeier, D., Degischer, H.P., ‘‘Foamability of particle reinforced aluminum melt’’, Materials Science and Engineering Technology, Cilt 34, No 1, 22-29, 2003.
  • Kadoi, K., Nakae, H., ‘‘Relationship between foam stabilization and physical properties of particles on aluminum foam production’’, Materials Transactions, Cilt 52, No 10, 1912-1919, 2011.
  • Davis, J. R., “ASM Specialty Handbook: Aluminum and Aluminum Alloys”, ASM International, 1993.
  • Campana, F., Pilone, D., “Effect of wall microstructure and morphometric parameters on the crush ehavior of Al alloy foams”, Materials Science and Engineering A, Cilt 479, No 1-2, 58–64, 2008.
  • Simancik, F., Behulova, K., Bors, L., “Effect of ambient atmosphere on metal foam expansion”, 2nd International Conference on Cellular Metals and Metal Foaming Technology, Bremen, Germany, 89, 18-20 June 2001.
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi-Cover
  • ISSN: 1300-1884
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: Oğuzhan YILMAZ
Sayıdaki Diğer Makaleler

KARAYOLU İLE TEHLİKELİ MADDE TAŞIMACILIĞI İÇİN COĞRAFİ BİLGİ SİSTEMİ DESTEKLİ ÇEVRESEL RİSK ANALİZİ

Serhan KARABULUT, Ebru ÖCALIR-AKÜNAL

FE-CU İKİLİ ALAŞIMLARININ KUTU BORLAMA DAVRANIŞINA BAKIR MİKTARININ ETKİSİ

Sezgin CENGİZ, Yücel GENÇER, Mehmet TARAKÇI, Yunus AZAKLI

TURBOŞARJLI ÖN YANMA ODALI BİR DİZEL MOTORUNDA BENZİN-DİZEL YAKITI KARIŞIMLARININ KULLANILMASININ MOTOR PERFORMANS PARAMETRELERİ VE NOx EMİSYONU ÜZERİNDEKİ ETKİLERİNİN DENEYSEL İNCELENMESİ

Zehra ŞAHİN

ELEKTRO EROZYON İLE İŞLEMEDE Cu-Cr T/M ELEKTROT KULLANIMININ İŞLEME PERFORMANSINA ETKİSİ

Orhan GÜLCAN, İbrahim USLAN, Yusuf USTA, Can ÇOĞUN

BİYODİZEL YAN ÜRÜNÜ GLİSERİNİN ESTERLEŞME VE ASETİLASYONU İLE DEĞERLİ KİMYASALLARIN ÜRETİMİ

Emine KAYA EKİNCİ, Gamze GÜNDÜZ, Nuray OKTAR

DÜŞÜK HIZLI KABLOSUZ KİŞİSEL ALAN AĞLARINDA GÜRÜLTÜLÜ SİNYALLERE YÖNELİK ADAPTİF VERİ DİZİSİ ÜRETECİ

Sibel ARSLAN, Selçuk ÖKDEM

HAVAYOLLARI TAMİR BAKIM SERVİS SAĞLAYICILARI İÇİN BİR ÜRETİM ÇİZELGELEME MODELİ VE ANALİZİ

Kadir ERTOGRAL, Murat ERKOC, Doğukan ÜLKER

KÜRESEL YÜZEYLER ETRAFINDA NANO AKIŞKANLARDA HAVUZ KAYNAMA ISI TRANSFERİNİN DENEYSEL İNCELENMESİ

Doğan ÇİLOĞLU, Abdurrehim BÖLÜKBAŞI, Harun ÇİFCİ

SODYUM HİDROKSİT (NaOH) VE POTASYUM HİDROKSİT (KOH) KULLANILARAK ÜRETİLEN MISIR YAĞI BİYODİZELLERİNİN OPTİMUM REAKSİYON PARAMETRELERİNİN KARŞILAŞTIRILMASI

Mert GÜLÜM, Atilla BİLGİN, Abdülvahap ÇAKMAK

Candida utilis MAYASIYLA LİPAZ ENZİMİ AKTİVİTESİNİN FARKLI ORTAM KOŞULLARINDA İNCELENMESİ

Neşe KEKLİKCİOĞLU ÇAKMAK, Ünsal AÇIKEL