Polimer Katkılı Harçlarda Farklı Kür Koşullarının Dayanıma Etkisi - Effect of Different Curing Conditions on Strength of Polymer-Incorporating Mortars

Polimer Katkılı Harçlarda Farklı Kür Koşullarının Dayanıma EtkisiBu çalışmada, farklı kür koşullarının polimer katkılı harçların eğilme ve basınç dayanımına etkisi incelenmiştir. Bu amaçla, normal portland çimentosu ve stiren-akrilik polimer emülsiyonu kullanılmıştır. Polimer ağırlıkça %0, 5, 10 ve 15 oranlarında çimento yerine ikame edilerek standart harç karışımları hazırlanmıştır. Çalışma kapsamında örneklerin kürlenmesi için üç farklı kür yöntemi kullanılmıştır. Bunlar, su kürü, etüv+su ve etüv+hava kürüdür. Hazırlanan harç örneklerinin üç farklı kür sonrası 7, 28 ve 90 günlük basınç ve eğilme dayanımları belirlenmiştir. Polimer katkılı harçlarda meydana gelen dayanım değişimleri kontrol harcı ile kıyaslamalı olarak değerlendirilmiştir. Effect of Different Curing Conditions on Strength of Polymer-Incorporating Mortars In this study, effect of different curing conditions on compressive and flexural strength of polymer-incorporating mortars was investigated. In this aim, normal portland cement and styrene-acrylic polymer emulsion were used. Mortar mixtures were prepared by replacing 0, 5, 10 and 15% polymer with by weight of cement. Three different curing conditions were used for curing the specimens. These are water curing, oven+water curing and oven+air curing. After these different curing conditions 7, 28 and 90 days compressive and flexural strength values of prepared mortar mixtures were determined. Strength variations of polymeric mortar mixtures were comparatively evaluated with control mortar mixture.

___

  • Ramli, M. and Tabassi A.A., “Effects of polymer modification on the permeability of cement mortars under different curing conditions: A correlational study that includes pore distributions, water absorption and compressive strength”, Construction and Building Materials, 28: 561–570 (2012).
  • Rai, U.S,, Singh, R.K.,” Effect of polyacrylamide on the different properties of cement and mortar”, Materials Science and Engineering A, 392: 42–50 (2005).
  • Ghrici, M., Kenai, S., Said-Mansour, M., “Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements”, Cement and Concrete Composites, 29: 542–9 (2007).
  • Nazari, A., Riahi, S. “The effects of Cr2O3 nanoparticles on strength assessments and water permeability of concrete in different curing media”, Materials Science and Engineering A, 528: 1173–82 (2011).
  • Del Vecchio, F.J.C., Reis, J.M.L., da Costa Mattos, H.S., “Elasto-viscoplastic behaviour of polyester polymer mortars under monotonic and cyclic compression”, Polymer Testing, 35: 62–72 (2014).
  • Fowler, D.W., “Polymers in concrete: a vision for the 21st century”, Cement and Concrete Composites, 21: 449–452 (1999).
  • Gorninski, J.P., Dal Molin, D.C., Kazmierczak, C.S., “Study of the modulus of elasticity of polymer concrete compounds and comparative assessment of polymer concrete and Portland cement concrete”, Cement and Concrete Research, 34: 2091–2095 (2004).
  • Ohama, Y., “Recent progress in concrete-polymer composites, review article”, Advanced Cement Based Materials, 5: 31–40 (1997).
  • Shao-jie, L., Qian-qian, H., Feng-qing, Z., “Chu Xiao-meng Utilization of steel slag, iron tailings and fly ash as aggregates to prepare a polymer-modified waterproof mortar with a core–shell styrene–acrylic copolymer as the modifier”, Construction and Building Materials, 72: 15–22 (2014).
  • Zhong, S.Y., Tan, M.H., “Chloride diffusivity of styrene–acrylate latex modified mortars”, Journal of Building Materials, 5: 394–398 (2012).
  • Huang, Y.W., Liu, W.Q., “Study on functional styrene–acrylate emulsion modified cement based materials”, Chemistry and Adhesion, 28: 320–3 (2006).
  • Peng, C.Y., Wen, Z.Y., “Preparation and properties of styrene–acrylate latex modified mortars”, Chemistry of Building Materials, 7: 21–3 (2002).
  • Del Vecchio, F.J.C., Reis, J.M.L., da Costa Mattos, H.S. , “Elasto-viscoplastic behaviour of polyester polymer mortars under monotonic and cyclic compression”, Polymer Testing, 35: 62–72 (2014).
  • Novoa, P.J.R.O., Ribeiro, M.C.S., Ferreira, A.J.M., Marques, A.T., “Mechanical characterization of lightweight polymer mortar modified with cork granulates”, Composites Science and Technology, 64: 2197–2205 (2004).
  • Rebeiz, K.S., “Precast use of polymer concrete using unsaturated polyester resin based on recycled PET waste”, Construction and Building Materials, 10: 215–220 (1995).
  • Rebeiz, K.S., “Time-temperature properties of polymer concrete using recycled PET”, Cement and Concrete Composites, 17: 111–124 (1995).
  • Aggarwal L.K., Thapliyal, P.C., Karade, S.R., “Properties of polymer-modified mortars using epoxy and acrylic emulsions”, Construction and Building Materials, 21: 379-383 (2007).
  • Ohama, Y., “Principle of latex modification and typical properties of latex modified mortar and concrete”, ACI Materials Journal, 86: 511-518 (1987).
  • Popovic, S., “Strength losses of polymer modified concrete under wet conditions”, In: David W.F., Polymer modified concrete, ACI SP-99, 165-189 (1987).
Celal Bayar Üniversitesi Fen Bilimleri Dergisi-Cover
  • ISSN: 1305-130X
  • Başlangıç: 2005
  • Yayıncı: Manisa Celal Bayar Üniversitesi Fen Bilimleri Enstitüsü
Sayıdaki Diğer Makaleler

Depolanmış Ürün Zararlılarına Karşı Entomopatojenik Fungus ve Bakterilerin Virulansları

Ali Sevim, Elif Sevim, Meryem Demirci

Bazı Tek Yıllık Erodium Taksonlarının Merikarpları Üzerinde Mikromorfolojik İncelemeler - Micromorphological Investigations on Mericarp of Some Annual Taxa of Erodium

Dilek Oskay, Özlem Eş

Bazı Tek Yıllık Erodium Taksonlarının Merikarpları Üzerinde Mikromorfolojik İncelemeler

Dilek OSKAY, Özlem EŞ

Smarandache Curves of a Spacelike Curve lying on Unit dual Lo-rentzian Sphere

Tanju Kahraman, Hasan Uğurlu

Ayla Bilgin

Alüminyum Bal Peteği Yapılarda Oluşan Eğilme Kuvvetlerinin Çoklu Regresyon İle İncelenmesi - Investigation Of Bending Strength With Multiple Regression In Aluminum Honeycomb Structures

Harun Akkuş, Hayrettin Düzcükoğlu, Ömer Şahin

Jelatin Doku İskelesinin Mekanik Özellikleri Üzerine Gözenek Oluşturucu Ajanın Boyutu ve Bağlantı Süresinin Etkileri - The Effects of Porogen Agent Size and Interconnection Time on the Mechanical Properties of Gelatin Scaffold

Melda Büyüköz, Sacide Alsoy Aktınkaya

Tamamı Cilt 11 Sayı 2 (Tamamı)

Türkiye’de Yayılış Gösteren Hyparrhenia hirta (L.) Stapf (Poaceae) Türünün Anatomik Yapısının Belirlenmesi - The Anatomical Study on Hyparrhenia hirta (L.) Stapf (Poaceae) Species in Turkey

Okan Kocabaş, Esra Kayacan, Yurdanur Akyol, Ersin Minareci, Canan Özdemir

Filtrasyon Membranları Üretim ve Karakterizasyon Yöntemleri - Fabrication and Characterization Techniques of Filtration Membranes

Yılmaz YÜREKLİ, İlker POLATOĞLU, Suat Bahar BAŞTÜRK