CE İşaretleme ve Odun Tabanlı Levhalar

CE işaretlemenin amacı kullanım amacına uygun ürünlerin Avrupa Birliği (AB) içinde serbestce ticaretinin yapılabilmesini sağlamaktır. Hem AB sınırları içinde üretilmiş hem de AB sınırları dışından ithal edilmiş ürünlere uygulanır. AB üyesi ülkelerde halen hüküm süren farklı teknik uygulamaların olması sorununu çözmek için tasarlanmıştır. CE işareti tek pazar içinde serbest ticarete engel bu farklı teknik uygulamaları, ürünlerin performanslarını göstermek için tek bir standart ve AB içinde yetkili olarak kabul edilmiş sistem belgelendirme ve test kuruluşları oluşturarak kaldırmayı amaçlar. Bu amaçla AB, bugüne kadar ürünlerle ilgili 24 farklı yönetmelik hazırlamıştır. Bu yönetmeliklerden biri de, yapı işleri ile ilgili temel gereksinimlerin sağlanmasını gerektiren Yapı Malzemeleri Yönetmeliği (YMY)’dir. Bu yönetmeliğin bir sonucu olarak, odun tabanlı levha endüstrisi yasal olarak ürünlerin doğru olarak işaretlenmesini sağlamak ve kullanım amacına uygun olduğunu göstermekle yükümlüdür. Bu yazıda YMY kapsamında bulunan odun tabanlı levhaların CE işaretlenmesi ve Türkiye’de yasal olarak CE işareti uygulamaları araştırılmıştır.

CE Marking and Wood Based Panels

The aim of CE Marking is to ensure that products which are fit for their intended use can be freely tradedthroughout the European Union (EU). This applies both to products produced within the EU and those importedfrom countries outside the EU. CE Marking is designed to overcome the problems which currently prevailthrough the application of different technical requirements in the member states of the EU. CE marking aims toremove these technical barriers to trade within the single market by establishing a single, agreed, standard fordemonstrating the performance of particular products, and a system of certification and test bodies which arerecognized as competent throughout the EU. For this purpose EU has accepted 24 different directives relatedwith products until now. One of these directives is the Construction Products Directive (CPD) requires to ensurethe essential requirements in respect of construction works. As a result of this CPD, wood based panelsindustries are now legally obliged to ensure that all products are correctly labelled and to demonstrate thatproducts are fit for their intended use. In this paper CE Marking of wood based panels included by the CPD andthe applications of CE Marking in Turkey legally have been scrutinized.

___

  • o Adelhoj, J., (2005), Ready for CE Marking of Timber and Wood-based Products, Danish Technological Institute.
  • o Anonim, (2002), Yapı Malzemeleri Yönetmeliği (89/106/EEC), Resmi Gazete Sayı : 24870, Başbakanlık Mevzuatı Geliştirme ve Yayın Genel Müdürlüğü, Ankara.
  • o Anonim, (2004), Yapı Malzemeleri Yönetmeliği (89/106/EEC) Kapsamında, Uygulanacak Teknik Şartnamelerin Yayımlanması Hakkında Tebliğ(Tebliğ No: TAU/2004-003), Resmi Gazete Sayı : 25501, Başbakanlık Mevzuatı Geliştirme ve Yayın Genel Müdürlüğü, Ankara.
  • o Anonim, (2001), 4703 Sayılı Ürünlere İlişkin Teknik Mevzuatın Hazırlanması ve Uygulanmasına Dair Kanun, Resmi Gazete Tarihi: 11 Temmuz 2001, Resmi Gazete Numarası: 24459, Başbakanlık Mevzuatı Geliştirme ve Yayın Genel Müdürlüğü, Ankara.
  • o Anonymous, (1989), Council Directive 89/106/EEC, Official Journal of the European Union, 40, Brussels
  • o Anonymous, (2006), CE Marking of Wood Products, in Particular MDF, www.mdf-info.org
  • o Anonymous, (1996), Decision No 1/95 of the EC-Turkey Association Council of 22 December 1995 on Implementing the Final Phase of the Customs Union, Official Journal L035, 1-47, Brussels.
  • o Anonymous, (2005), On the Principles, Priorities, and Conditions Contained in the Accession Partnership with Turkey, Commission of the European Communities, Brussels.
  • o Anonymous, (2003), EU Mandates CE Mark for Wood Based Panels, Wood Products International, Volume 3, Issue 3.
  • o Baysan, Ö. ve Civelek, O., (2004), Türkiye’nin Avrupa Birliği Teknik Mevzuatına Uyum Çalışmaları ve CE İşareti, Istanbul Sanayi Odasi Yayinları No: 2004/11, ISBN: 975-512-860-3.
  • o İlhan, M., (2006), TSE Yayın ve Tanıtma Müdürlüğü Bilgi Edinme Birimi, Bilgi Edinme Talebi, Sayı: 73.05.01 / 5383, Ankara.
  • o Kayalar, T., (2006), Türkiye’nin Avrupa Birliği Mevzuatına Uyumu, www.foreigntrade.gov.tr/tds/ABTeknik/ kitap.doc
  • o King, D., (2006), American Plywood and European Standarts, The Engineered Wood Association, Edition Eight.
  • o Lemmel, M., (2000), Guide to the Implementation of Directives Based on the New Approach and the Global Approach, European Communities, Office for Official, , 112-121.
  • o Sierra, E., (1993), The EC's New System for Ensuring Product Quality, International Trade Forum.
  • o Smith, W., (1999), Maine Exporter’s Guide to the European Union’s CE marking Requirements, Maine International Trade Center.
  • o Sulman D., (2006), It's a question of Standards, Scottish Timber Trade Association, www.stta.org.uk/questionof standa.html
Bartın Orman Fakültesi Dergisi-Cover
  • ISSN: 1302-0943
  • Yayın Aralığı: Yılda 3 Sayı
  • Başlangıç: 1998
  • Yayıncı: Bartın Üniversitesi Orman Fakültesi